Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    IT Manager 5,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    USA
    Posts
    5,384
    Rep Power
    83

    M2535 mfp won't wake from sleep mode

    For some reason they keep on going to sleep and donít wake up the all of our 4 users that have that printer seem to have that problem. We have installed that printer locally and on the network we checked the settings and changed it from energy saver to Quick recovery about a week ago but it continues to keep doing the same thing. On the printer itself it doesnít show it goes to sleep but when we print it wonít go thru so we just shut it off and turn it back on then Iíll be good for about an hour.

  2. #2
    Junior Member
    Join Date
    May 2015
    Location
    Kamen
    Posts
    2
    Rep Power
    0

    Re: M2535 mfp won't wake from sleep mode

    Well i heard this kind of problem could be firmware related, but usually it is a DHCP problem and the printer does not even get the wakeup-call . Even if you can use the webinterface, the setting on the printer and printer-driver should better be a fixed IP.

    If that does not help you, ping the machine. If the response-time is >2ms the problem could be caused by a defective cable.
    WLAN bridges to printers often cause delay problems as well, so i'd suggest to try it again with a cable or to conect the machine directly to a PC to make sure the problem is not network related.

    If you tried all that before and need better ideas than that, please write it into your coment.
    Last edited by duplexcopy; 06-03-2015 at 08:42 AM.

  3. #3
    Service Tech / IT Rep 100+ Posts JVergin's Avatar
    Join Date
    Jan 2009
    Location
    Nebraska
    Posts
    179
    Rep Power
    25

    Re: M2535 mfp won't wake from sleep mode

    I had this problem with only one 255c out in the field. Not only print jobs, but walking up to the copier and trying to wake it up didn't work. You had to shut it off and turn it back on. Of course I could never duplicate it on site. I made the sleep mode to quick recovery change and firmware update, still occurred. Last I was there I re-seated connectors in the back and reloaded freshly downloaded firmware for the 3rd time. I haven't heard back for a few months now.

    Anyone else have any input?
    -- "Did you try cleaning the glass?"

  4. #4
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    590
    Rep Power
    34

    Re: M2535 mfp won't wake from sleep mode

    Quote Originally Posted by bsm2 View Post
    For some reason they keep on going to sleep and donít wake up the all of our 4 users that have that printer seem to have that problem. We have installed that printer locally and on the network we checked the settings and changed it from energy saver to Quick recovery about a week ago but it continues to keep doing the same thing. On the printer itself it doesnít show it goes to sleep but when we print it wonít go thru so we just shut it off and turn it back on then Iíll be good for about an hour.
    Did you find a solution? We have a brand new M2035 with the same problem. We have replaced it at the customers site and have the same problem in our office. Have tried new FW.

  5. #5
    IT Manager 5,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    USA
    Posts
    5,384
    Rep Power
    83

    Re: M2535 mfp won't wake from sleep mode

    Quote Originally Posted by B0265 View Post
    Did you find a solution? We have a brand new M2035 with the same problem. We have replaced it at the customers site and have the same problem in our office. Have tried new FW.
    Think the problem was old drivers, you must remove drivers from server and every workstation. I all fail load a 4300 hp driver if only printing single sided

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Posts
    335
    Rep Power
    25

    Re: M2535 mfp won't wake from sleep mode

    The issue he is describing is not driver related. It won't even come out of sleep mode at the machine. Pushing the sleep button does nothing. So its not the driver.

  7. #7
    Technician
    Join Date
    Nov 2019
    Location
    Pa
    Posts
    21
    Rep Power
    4

    Re: M2535 mfp won't wake from sleep mode

    5 year old thread brother.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here