Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Nov 2020
    Location
    Melbourne
    Posts
    2
    Rep Power
    0

    Kyocera M6030 Printing lines

    I had yellow and magenta vertical lines printing on the right hand size of each color print.

    So the geek in me decided to open it all up, clean up all the drums and reassemble it all together.

    Now its printing just lines . photos attached

    Imgur: The magic of the Internet

  2. #2
    Technician
    Join Date
    Nov 2019
    Location
    Pa
    Posts
    38
    Rep Power
    11

    Re: Kyocera M6030 Printing lines

    I have had this problem and was a bad black drum.

  3. #3
    Master Of The Obvious 10,000+ Posts
    Kyocera M6030 Printing lines

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Kyocera M6030 Printing lines

    One of the developing units is arcing to the drum, via the developer spacers. The trick is determining which ones, without replacing all 8 units (drum and developing unit of whatever color).

    If the bars do not show on black images, you can rule out the black drum & developing units.

    Were I to take a wag, I'd say yellow is your color.

    Keep in mind that all the color drums are the same part, so you can use your new drum as C, M, or Y. But the developing units are different, specifically C, M, or Y.

    Does that make sense? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Junior Member
    Join Date
    Nov 2020
    Location
    Melbourne
    Posts
    2
    Rep Power
    0

    Re: Kyocera M6030 Printing lines

    @blackcat4866 - why do you think its the yellow?

  5. #5
    Master Of The Obvious 10,000+ Posts
    Kyocera M6030 Printing lines

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Kyocera M6030 Printing lines

    When I've seen this issue on a wide variety of color Kyocera engines, the color that has the smallest, narrowest, or lightest color bars is usually the one causing the issue ... but not every time. Call it an educated hunch. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Aug 2011
    Posts
    575
    Rep Power
    57

    Re: Kyocera M6030 Printing lines

    i agree with blackcat.
    Seen several cases and mostly coming from yellow DV/DK
    i think it would duplicated by the belt.
    Please remember that yellow will be the first color which would transfered.
    (count clockwise turning from belt)
    If you print in bk, no colordrive for color DVs and no maincharging for color DKs

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here