Reset

[SL65]

Hello,

I have purchased a Kyocera M6535cidn from a liquidated company and when i start it up it is trying to connect to a server and i cannot access the admin login as i dont have the username and password supplied with it.

Is there anyway i can sort this issue out? May be i can hard reset the machine?

TIA

[GIUBOSS]

you have already tried with the default: Admin, pw. : Admin?

[SL65]

you have already tried with the default: Admin, pw. : Admin?

Yes I tried no luck

[GIUBOSS]

if your machine has a lock with an access code, you need to log in to administrator mode. As a last resort, restore in service mode

[spw]

Might try the numerical value of the model number.

for example on Kyocera 420 you can put in 4200 for the pass and its the same.

i dont know what it is for a 6535 but you could try 3500 or something along those lines. But ya Giuboss is right its default is Admin Admin.

[ntbann]

3500 3500 is correct for a 6535

[progoffice]

Have you tried running maintenance mode 21? This should initialize the machine back to out of the box status.