Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    bawhcs
    Guest

    KM F650+ or Panasonic UF790

    Hello all...Does anyone know how to turn off the G3 mode on these.
    I have a customer that needs it tuned off to be able to capture the sent page number for billing software. The software they use is Argos by Sepialine.If your curious about the software Sepialine - Print Tracking, Copy + Fax Tracking and more for service professionals and providers


    TIA

  2. #2
    The Great Gazoo 250+ Posts kyoceradude's Avatar
    Join Date
    Aug 2006
    Location
    St. John, IN
    Posts
    442
    Rep Power
    36
    When you say turn off, are you wanting to change the tx or rx speed, db level or V34 modem start speed?

    Send me a PM I'll e-mail manual.
    Last edited by kyoceradude; 01-25-2007 at 07:40 PM. Reason: Added info
    My mission here on Earth is to help all you Dum-Dums!

  3. #3
    bawhcs
    Guest
    The way I understand it is that I need to turn off the G3 communication mode. If it is on, the system will only be able to track the duration of the
    call, not the number of pages. I was told that if you force the machine to
    comm under 14.4 it won't use G3 but that would be very slow. Also it looks like the Super G3 will over ride this anyway if it detects another Super G3 fax. Not sure though

  4. #4
    The Great Gazoo 250+ Posts kyoceradude's Avatar
    Join Date
    Aug 2006
    Location
    St. John, IN
    Posts
    442
    Rep Power
    36
    14.4 is the max speed anyway. G3 is a standard for communication which that to my knowledge can not be disabled. You can only change and lock in comm speeds. Not sure what they are needing.
    My mission here on Earth is to help all you Dum-Dums!

  5. #5
    bawhcs
    Guest
    I agree...all I know is what the software developer asked my customer, and I can't afford to lose them. I did call The one of the co-developers this morning and he could only tell me that so far everyone else has been able to use "keyboard VooDoo" to disable the G3.
    So if I could be 100% sure that forcing the fax to go slower to keep it from using the G3 mode that may be my only hope of keeping them.

  6. #6
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Rep Power
    0
    UF-490: In Service Mode 1 No.19 you can enable or not the ITU-T V.34.

    1 = Off
    2 = On
    3 = Select

    Selects whether the ITU-T V.34 is Off, On or Select.
    Select: Select whether the ITU-T V.34 is Off or On,
    when entering Phone Book Dialing Numbers
    or Manual Number Dialing.
    ! RTFM !
    My site: http://www.e-club.gr/

  7. #7
    bawhcs
    Guest
    Thanks guys...thats what I needed

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here