Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician drazen7777's Avatar
    Join Date
    Sep 2010
    Posts
    36
    Rep Power
    23

    Kyoecra FS- 8008 print problem

    I have a problem with mentioned kyo , and the problem is this , every second , third fourth or so , print came out like it is washed out , did someone had similar problems and could give me a hint?

    Regards

    Drazen

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    118
    Rep Power
    26
    hi,
    in the past i had the same problem.
    check whether the solenoid of the sec transfer is not "hanging", are releases too late.
    please also check the clutches of the dev. units;

  3. #3
    Technician drazen7777's Avatar
    Join Date
    Sep 2010
    Posts
    36
    Rep Power
    23
    Thanks for reply , i solved it last week . You are wright ,the problem was with the solenoid of the secondary transfer(all rusty inside) he was late and give me a lot of trouble until i figured out that he was the problem. Thank you again . Best regards.

    Sent from my HTC Desire using Tapatalk
    Technician -- a person who fixes the mistakes made by engineers.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here