Results 1 to 9 of 9
  1. #1
    Nelo
    Guest

    Kyocera FS 8100DN error 7913:0025097

    Kyocera FS 8100 DN having the error 7913:0025097, replaced every consumables and did basic reset "switch off and then on" error still remain. Kindly need assistance on this error, what does it relate to?

  2. #2
    Master Of The Obvious 10,000+ Posts
    Kyocera FS 8100DN error 7913:0025097

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Kyocera FS 8100DN error 7913:0025097

    Two questions:
    1) Why are you replacing all the consumables at 25,097 prints?
    2) Have you looked up the 7913 error code in the service manual?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 5,000+ Posts
    Kyocera FS 8100DN error 7913:0025097


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    154

    Lightbulb Re: Kyocera FS 8100DN error 7913:0025097

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  4. #4
    Nelo
    Guest

    Re: Kyocera FS 8100DN error 7913:0025097

    Quote Originally Posted by blackcat4866 View Post
    Two questions:
    1) Why are you replacing all the consumables at 25,097 prints?
    2) Have you looked up the 7913 error code in the service manual?

    =^..^=
    I dont have a service manual and suspecting faulty consumables I replaced them to see if the error would go off. Im like confused and not sure witch section the error might relate to.

  5. #5
    Master Of The Obvious 10,000+ Posts
    Kyocera FS 8100DN error 7913:0025097

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Kyocera FS 8100DN error 7913:0025097

    You wouldn't be confused if you read the service manual.
    I don't read manuals to people who are perfectly able to read, or are too lazy to read.

    You probably spent $600 on unnecessary parts to save the cost of a $12.77 manual.

    Please read the manual. Please try something. Then please ask for help only then. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 1,000+ Posts
    Kyocera FS 8100DN error 7913:0025097


    Join Date
    Feb 2010
    Posts
    1,988
    Rep Power
    75

    Re: Kyocera FS 8100DN error 7913:0025097

    I wont pile on, other than to say it's a FS-C8100dn.

    Your code is for the Magenta Developer unit.

    Replace M dev. unit or Engine Board.

  7. #7
    Junior Member
    Join Date
    May 2019
    Location
    Philadelphia
    Posts
    1
    Rep Power
    0

    Re: Kyocera FS 8100DN error 7913:0025097

    Quote Originally Posted by blackcat4866 View Post
    You wouldn't be confused if you read the service manual.
    I don't read manuals to people who are perfectly able to read, or are too lazy to read.

    You probably spent $600 on unnecessary parts to save the cost of a $12.77 manual.

    Please read the manual. Please try something. Then please ask for help only then. =^..^=
    Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Jun 2013
    Posts
    164
    Rep Power
    30

    Re: Kyocera FS 8100DN error 7913:0025097

    Quote Originally Posted by Forest K View Post
    Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.
    You are seriously going to blast someone for a (valid) reply to a post almost 11 years ago? That's brilliant!

  9. #9
    Field Supervisor 500+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    579
    Rep Power
    35

    Re: Kyocera FS 8100DN error 7913:0025097

    Quote Originally Posted by Forest K View Post
    Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.
    And Black Cat no less! He is probably the most knowledgeable person on here! You should be black listed. Everyone remember Forest K. No help for him!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here