Results 1 to 9 of 9
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Aug 2008
    Location
    CHARLOTTE, NC
    Posts
    395
    Rep Power
    35

    XM3250 ADF multifeeding

    Starting to see these doc feeders multifeed the last 3 or 4 pages all at once. Never the first pages, just the last 3 or 4. It's almost becoming a trend. What concerns me is that alot of them have less than 10k. Lexmark support has no advice except to change adf feed and sep rollers. I've tried a little more pressure on sep roller, but putting in new rollers has been the only option so far. Am I the only one seeing this ?

  2. #2
    Field Supervisor 500+ Posts
    XM3250 ADF multifeeding

    dalewb74's Avatar
    Join Date
    Feb 2018
    Posts
    875
    Rep Power
    29

    Re: XM3250 ADF multifeeding

    haven't seen it myself, but is the issue fixed if you replace the recommended rollers? or does it keep multi-feeding with new rollers as well? are you getting a jam code? if so what's the code?

  3. #3
    Technician
    Join Date
    Oct 2013
    Posts
    34
    Rep Power
    22

    Re: XM3250 ADF multifeeding

    I've had this problem on quite a few of these machines pretty much straight out the box, in some cases we've had to change to another model as the ADF was constantly multi feeding and jamming even with new rollers.

    Decent machines printing wise but when it comes to scanning I find them pretty useless. There is a bulletin about changing the top cover because sometimes it pops open and causes jams, not sure if this is related to multi feeding though.

  4. #4
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Re: XM3250 ADF multifeeding

    The ADF seems to be a weak spot in most of the Lexmark machines.

  5. #5
    Master Of The Obvious 10,000+ Posts
    XM3250 ADF multifeeding

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: XM3250 ADF multifeeding

    Theoretically you would want to decrease the spring pressure on a separation roller. You'd want to increase the spring pressure on a separation pad. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Senior Tech 250+ Posts
    XM3250 ADF multifeeding

    arnh79's Avatar
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    445
    Rep Power
    43

    Re: XM3250 ADF multifeeding

    I've had the same issue on this series. I did a warranty claim on the sep roller and the replacement part Lexmark shipped me was different. Unfortunately, I didn't keep the old roller assembly so I can't remember what was changed except that it was related to the sheet/pad that rests just before the roller. Since I replaced the sep roller assembly I haven't had an issue.
    Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

  7. #7
    Senior Tech 100+ Posts
    XM3250 ADF multifeeding

    Nachoman4life's Avatar
    Join Date
    Oct 2007
    Location
    Topeka Kansas
    Posts
    212
    Rep Power
    40

    Talking Re: XM3250 ADF multifeeding

    They added a spacer under the sep pad before the roller to push the pad up more.
    Where the heck is my spring hook?

  8. #8
    Junior Member
    Join Date
    Oct 2019
    Location
    Bloomer. WI
    Posts
    2
    Rep Power
    0

    Re: XM3250 ADF multifeeding

    I too have this issue, did the warranty and the sep roller they sent to me had a small 2 stamped on the back, worked good for 3 devices, now warranty is up but many more to go. I will try adding a spacer and let you all know how it goes.

  9. #9
    Technician poultryman17's Avatar
    Join Date
    Dec 2014
    Location
    IL
    Posts
    10
    Rep Power
    19

    Re: XM3250 ADF multifeeding

    updated pn# is 41X1325

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here