Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Technician
    Join Date
    Sep 2019
    Location
    Oakland
    Posts
    14
    Rep Power
    0

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by Lance15 View Post
    Check this thread on the reliability of Lexmark drums:

    Faulty Lexmark Imaging Units.
    Thanks, lots of info in there that possibly relates directly to the OP's issue.

  2. #12
    Master Of The Obvious 10,000+ Posts
    Lexmark XM 7155 white lines

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by blackcat4866 View Post
    If Lex toner cartridges sit on the shelf too long you can get mottling where the seal contacts the developing roller. Dry wiping the developing roller usually solves this. Certain models are easier to get to the developing roller than others. =^..^=
    I'm sticking with my original diagnosis.

    Another consideration: Since this is monocomponent developing, it only takes a little paper dust under the S-blade to create voids on the developing roller. This was particularly common on Samsung boxes. I've taken apart a few of the Samsung cartridges, but I can never seem to get them back together again. =^..^=
    Last edited by blackcat4866; 10-01-2019 at 01:09 AM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #13
    Service Manager 10,000+ Posts
    Lexmark XM 7155 white lines

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by blackcat4866 View Post
    I'm sticking with my original diagnosis. =^..^=
    +1 BC

  4. #14
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    172
    Rep Power
    20

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by blackcat4866 View Post
    I'm sticking with my original diagnosis.

    Another consideration: Since this is monocomponent developing, it only takes a little paper dust under the S-blade to create voids on the developing roller. This was particularly common on Samsung boxes. I've taken apart a few of the Samsung cartridges, but I can never seem to get them back together again. =^..^=

    Here is a photo of the "developer roll" after taking the imaging unit apart.
    I have cleaned the laser opening with a q-tip with no improvement.
    Does anyone have the part # for HVPS & System board ?
    Thanks,
    Dave
    Attached Images Attached Images

  5. #15
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    172
    Rep Power
    20

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by Pafasa View Post
    I totally agree with your logic, but I have seen stranger things. It only takes a few seconds to check. Run a q-tip back and forth in the laser slot. see what comes out on the q-tip.

    Another thought is the drum/imaging unit is failing prematurely. possibly due to bad toner or too much heat inside the machine?

    Here is a photo of the "developer roll" after taking the imaging unit apart.
    I have cleaned the laser opening with a q-tip with no improvement.
    Does anyone have the part # for HVPS & System board ?
    Thanks,
    Dave
    Attached Images Attached Images

  6. #16
    Service Manager 10,000+ Posts
    Lexmark XM 7155 white lines

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: Lexmark XM 7155 white lines

    Quote Originally Posted by deputydogg View Post
    Here is a photo of the "developer roll" after taking the imaging unit apart.
    I have cleaned the laser opening with a q-tip with no improvement.
    Does anyone have the part # for HVPS & System board ?
    Thanks,
    Dave
    Frankly the coverage on mag looks to have lines and poor coverage

    Did you clean all hvps contacts..

    Sent from my SM-G960U using Tapatalk

  7. #17
    Master Of The Obvious 10,000+ Posts
    Lexmark XM 7155 white lines

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Lexmark XM 7155 white lines

    You have contamination under the S-blade. Boards will do nothing for this ... but spending some money for no good reason. Use that money to buy a few replacement cartridges. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #18
    Junior Member
    Join Date
    Nov 2019
    Location
    Buenos Aires
    Posts
    1
    Rep Power
    0

    Re: Lexmark XM 7155 white lines

    Try cleaning the laser crystals, it's easy to do and costs nothing.

  9. #19
    Service Manager 1,000+ Posts
    Lexmark XM 7155 white lines


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Lexmark XM 7155 white lines

    Thanks Scotty. Those crystals were always a problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here