Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Dec 2019
    Location
    Willow Springs
    Posts
    1
    Rep Power
    0

    Lexmark X464 scanner

    I have this Lexmark X464 connected to a Windows 10 PC via ethernet cable, and the printer works fine. However Windows 10 will not recognize the scanner unless the USB cable is plugged in. I want to make scanning as well as printing available on the network. I have installed the latest driver per Lexmark.

    Any ideas?

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    785
    Rep Power
    24

    Re: Lexmark X464 scanner

    You need to use the ScanBack Utility to scan from network.

    http://support.lexmark.com/index?doc...erlocale=EN_US

    http://support.lexmark.com/index?pag...erlocale=EN_US

    You need to make sure Profiles are enabled on the printer, otherwise, the ScanBack Utility will not work.


    There is also this driver available for the printer:
    http://support.lexmark.com/index?doc...erlocale=EN_US

    I'm used to the ScanBack Utility as one of our accounts uses it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here