Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Dec 2019
    Location
    Willow Springs
    Posts
    1
    Rep Power
    0

    Lexmark X464 scanner

    I have this Lexmark X464 connected to a Windows 10 PC via ethernet cable, and the printer works fine. However Windows 10 will not recognize the scanner unless the USB cable is plugged in. I want to make scanning as well as printing available on the network. I have installed the latest driver per Lexmark.

    Any ideas?

  2. #2
    Service Manager 1,000+ Posts
    Lexmark X464 scanner


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Lexmark X464 scanner

    You need to use the ScanBack Utility to scan from network.

    http://support.lexmark.com/index?doc...erlocale=EN_US

    http://support.lexmark.com/index?pag...erlocale=EN_US

    You need to make sure Profiles are enabled on the printer, otherwise, the ScanBack Utility will not work.


    There is also this driver available for the printer:
    http://support.lexmark.com/index?doc...erlocale=EN_US

    I'm used to the ScanBack Utility as one of our accounts uses it.

  3. #3
    Field Supervisor 500+ Posts
    Lexmark X464 scanner

    dalewb74's Avatar
    Join Date
    Feb 2018
    Posts
    875
    Rep Power
    29

    Re: Lexmark X464 scanner

    so you are saying it connects directly from the PC to the copier and doesn't go through a router? i would plug into the router and setup the scans that way. plus the fact if it comes up later it will be easier to add more computers for printing and scanning.

  4. #4
    Service Manager 1,000+ Posts
    Lexmark X464 scanner


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: Lexmark X464 scanner

    Connect the printer as usual (network, configure IP, etc.). Install the ScanBack utility on users PCs and configure. If you don't see Profiles on the control panel of the printer, you'll have to run through the Initial Setup Wizard to enable it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here