Results 1 to 9 of 9
  1. #1
    Service Manager 1,000+ Posts
    Lexmark ms811dn fuser reset?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,551
    Rep Power
    51

    Lexmark ms811dn fuser reset?

    We replaced the fuser in the roller kit and when we go into config mode it only lets us reset the roller kit message and not the fuser message and weíre still getting a maintenance kit very low message how do we reset that?

    thanks!

    k

  2. #2
    Service Manager 10,000+ Posts
    Lexmark ms811dn fuser reset?

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    23,286
    Rep Power
    662

    Re: Lexmark ms811dn fuser reset?

    Quote Originally Posted by mrfuser View Post
    We replaced the fuser in the roller kit and when we go into config mode it only lets us reset the roller kit message and not the fuser message and weíre still getting a maintenance kit very low message how do we reset that? thanks!
    man don't you ever BUY/LOCATE SM for the units you work on?

    would expedite your service calls and would the need for you to post these type posts!

  3. #3
    Service Manager 1,000+ Posts
    Lexmark ms811dn fuser reset?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,551
    Rep Power
    51

    Re: Lexmark ms811dn fuser reset?

    Sorry to offend. Iím out in the boondocks and do what I can. I can get the SM when I drive the 35 miles back to my shop. My mistake for thinking someone would be kind enough to provide the info. Why are you on this site?

  4. #4
    Service Manager 10,000+ Posts
    Lexmark ms811dn fuser reset?

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    23,286
    Rep Power
    662

    Re: Lexmark ms811dn fuser reset?

    Quote Originally Posted by mrfuser View Post
    Sorry to offend. Iím out in the boondocks and do what I can. I can get the SM when I drive the 35 miles back to my shop. My mistake for thinking someone would be kind enough to provide the info. Why are you on this site?
    1345 posts

    0 rep power

    many many red cards

    I HELP People that put forth an effort to show they tried.

    you had the manual and didn't take it with you?

    did you leave your screw driver 'back at the office' also?

    part of being a competent tech is to follow the BSA rule " ALWAYS BE PREPARED "

    get the idea?

  5. #5
    Service Manager 1,000+ Posts
    Lexmark ms811dn fuser reset?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,551
    Rep Power
    51

    Re: Lexmark ms811dn fuser reset?

    thanks. Iím sure you lead a wonderful happy life. Enjoy

    Quote Originally Posted by Phil B. View Post
    1345 posts

    0 rep power

    many many red cards

    I HELP People that put forth an effort to show they tried.

    you had the manual and didn't take it with you?

    did you leave your screw driver 'back at the office' also?

    part of being a competent tech is to follow the BSA rule " ALWAYS BE PREPARED "

    get the idea?

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    6,993
    Rep Power
    332

    Re: Lexmark ms811dn fuser reset?

    Quote Originally Posted by mrfuser View Post
    Sorry to offend. Iím out in the boondocks and do what I can. I can get the SM when I drive the 35 miles back to my shop. My mistake for thinking someone would be kind enough to provide the info. Why are you on this site?
    My oh my, Kelly strikes again
    mrfuser, can you ever stop this type of nonsense
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  7. #7
    Service Manager 1,000+ Posts
    Lexmark ms811dn fuser reset?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,551
    Rep Power
    51

    Re: Lexmark ms811dn fuser reset?

    Ok. So this site is now for tech bashing rather than helping? I have helped many many people on here privately and have even monetarily supported this site. If you donít want to help donít post annoying crap

  8. #8
    Technician
    Join Date
    Jan 2018
    Location
    Medina, Ohio
    Posts
    14
    Rep Power
    13

    Re: Lexmark ms811dn fuser reset?

    Fuser must be replaced new.
    There is no fuser reset its built into fuser like a one time fuse.
    Fuser/Maintenance End of Life Statement from Laserpros.com below.
    Lexmark M5155, M5163, M5170, MS810, MS811, MS812, MX710, MX711,
    MX810, MX811, MX812, XM5163, XM5170, XM7155, XM7163, XM7170
    NOTICE:
    After 40X7743/40X8420 fuser/maintenance kit has reached its End of Life (EOL), the printer
    will stop functioning and fusing assembly will need to be replaced. This is controlled by a
    function built-in to the fuser by the Original Equipment Manufacturer (OEM) to track page
    count.
    Prior to 40X7743/40X8420 reaching its EOL, the following 80.xy or Scheduled Maintenance
    error messages will be received via the control panel:
    80.0x "Replace Maintenance kit"—nearly low
    80.1x "Replace Maintenance kit"—low
    80.2x "Replace Maintenance kit"—very low, 2000 estimated pages remain
    80.3x "Replace Maintenance kit"—low, 0 estimated pages remain
    80.4x "Replace Maintenance kit"—very low, 0 estimated pages remain
    These messages are not indicators of a fuser error, but rather warning the customer that the
    fusing component is reaching or has reached its EOL. Customers receiving these errors must
    purchase a replacement 40X7743 fusing assembly or 40X8420 maintenance kit.
    Please visit our website Laser Pros International | Laser Printer Parts or call 715-369-5995, Option 1 to order a
    replacement 40X7743 fusing assembly or 40X8420 maintenance kit

  9. #9
    Field Supervisor 500+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    683
    Rep Power
    38

    Re: Lexmark ms811dn fuser reset?

    Haven't seen it often but we have encountered the PM message remain after installing a new OEM Lexmark PM kit in this series.

    I have been able to replace the reset chip in the those fusers to make them reset the message.

    40G4135 Fuser RESET chip For lexmark MX7155 MS810 MS811 MS812 MX710 MX5236 USA | eBay

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here