Results 1 to 4 of 4
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Mar 2020
    Location
    Munich
    Posts
    81
    Rep Power
    9

    Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    Because of pale/dark uneven Copies i performed a Scanner Calibration reset in 36 Diagnostics mode. The copy via flatbet is ok now. But via ADF I get completely black pages with no copy on it at all.
    What can I do?
    Thank you

  2. #2
    Master Of The Obvious 10,000+ Posts
    Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    Did you notice that the manual tells you not to Reset values unless scanner has been replaced? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 10,000+ Posts
    Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    Quote Originally Posted by blackcat4866 View Post
    Did you notice that the manual tells you not to Reset values unless scanner has been replaced? =^..^=
    lol READ THE MANUAL? why when they can come here and pick our brains!

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Mar 2020
    Location
    Munich
    Posts
    81
    Rep Power
    9

    Re: Black Copy with Lexmark MX 511 after performing Scanner Calibration Reset

    Sorry, I've read the Manual but ignored this warining, because what else should I've done with the uneven quality.
    I've replaced the CIS Assy with one from a used machine, did the reset again and all works fine.
    Thank you.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here