Originally Posted by
Hansoon
Mirror kicked out of position for sure.
No laser beam, no image. Laser on these machines is always working, if not tampered with.
So likely the mirror reflecting the laser beam coming from the polygon mirror to the drum is out of place. What did you all remove in the attempt to "clean" the laser unit? The location of the black housing containing the laser diode, polygon mirror or dynamic laser diode, whatever, is factory adjusted and very hard to readjust in the field.
The vertical voids are not coming from the laser unit, but from the stainless steel doctor blade regulating the thickness of the toner layer on the toner transport roller. Standard issue with these beauties.
Hans
Bookmarks