Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Apr 2009
    Location
    Lallmatie
    Posts
    14
    Rep Power
    28

    Lexmark Ms 310 dn

    Hello
    I am working on a Lexmark MS310dn, it had a slight print defect due to the laser unit mirror mirror (long mirror in front of the laser unit) but was printing well except for a vertical missing print. I opened the unit and cleaned the mirror and put back but now I am getting completely blank pages. All connections are well connected.
    Any suggestions what could be wrong.

    Thanks

  2. #2
    Service Manager 2,500+ Posts
    Lexmark Ms 310 dn

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,929
    Rep Power
    84

    Re: Lexmark Ms 310 dn

    Mirror kicked out of position for sure.
    No laser beam, no image. Laser on these machines is always working, if not tampered with.

    So likely the mirror reflecting the laser beam coming from the polygon mirror to the drum is out of place. What did you all remove in the attempt to "clean" the laser unit? The location of the black housing containing the laser diode, polygon mirror or dynamic laser diode, whatever, is factory adjusted and very hard to readjust in the field.

    The vertical voids are likely not coming from the laser unit, but from the stainless steel doctor blade regulating the thickness of the toner layer on the toner transport roller. Standard issue with these beauties.

    Hans
    Last edited by Hansoon; 08-18-2022 at 06:12 AM.
    " Sent from my Intel i286 using MS-DOS 2.0 "

  3. #3
    Technician
    Join Date
    Apr 2009
    Location
    Lallmatie
    Posts
    14
    Rep Power
    28

    Re: Lexmark Ms 310 dn

    Quote Originally Posted by Hansoon View Post
    Mirror kicked out of position for sure.
    No laser beam, no image. Laser on these machines is always working, if not tampered with.

    So likely the mirror reflecting the laser beam coming from the polygon mirror to the drum is out of place. What did you all remove in the attempt to "clean" the laser unit? The location of the black housing containing the laser diode, polygon mirror or dynamic laser diode, whatever, is factory adjusted and very hard to readjust in the field.

    The vertical voids are not coming from the laser unit, but from the stainless steel doctor blade regulating the thickness of the toner layer on the toner transport roller. Standard issue with these beauties.

    Hans
    The vertical line was due to a slight discoloration of the mirror at the exact spot, drum unit new, only a single blank vertical missing print from top to bottom about 2 mm wide.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here