Pulled this Lexmark C4150 off the shelf, powered on and it is giving me this 900.00 Firmware Error (Pic Attached). It was working fine last week. Lexmark 900.00 error.jpg
Pulled this Lexmark C4150 off the shelf, powered on and it is giving me this 900.00 Firmware Error (Pic Attached). It was working fine last week. Lexmark 900.00 error.jpg
1. Power off the printer and leave it powered off for 20 seconds or more. Doing this will clear the printer’s memory.
2. While the printer is off, clear any pending print jobs from the computer of the network queue. This prevents the corrupted job from being sent to the printer again.
3. Power the printer back on.
4. If the printer goes to the READY status, try printing again If the error is not resolved, request support from a service provider.
also while the printer is turned off, and you unplug the power. press the power button to remove any residual power. afterwards plug it back in and then power on.
Bookmarks