Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Jim Isbell
    Guest

    Lexmark Optra T610 with marks on pages

    There is a regular gray mark appearing regularly on the page about every 3 and a half inches. Sounds like the circumference of a roller. Which one is that size in circumference?

  2. #2
    Master Of The Obvious 10,000+ Posts
    Lexmark Optra T610 with marks on pages

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,795
    Rep Power
    380

    Probably Fuser Roller

    Here's my formula:

    Circumference/PI=diameter

    3.5/3.14159265 = 1.1140846"

    It could be a drum or a fuser roller, but probably fuser.

  3. #3
    Jim Isbell
    Guest
    Thanks, I will check that and see if a cleaning will do the trick.

  4. #4
    Service Manager 250+ Posts lkrsardis's Avatar
    Join Date
    Dec 2007
    Location
    batesville ms
    Posts
    316
    Rep Power
    32

    marks-a-lot

    try removing and cleaning the charge roller and transfer roller with a damp rag.

  5. #5
    Jim Isbell
    Guest
    Thanks.

  6. #6
    Jim Isbell
    Guest
    You wouldnt happen to know the part numbers of the charge roller and the transfer roller?

  7. #7
    Master Of The Obvious 10,000+ Posts
    Lexmark Optra T610 with marks on pages

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,795
    Rep Power
    380
    Transfer Roller Part#: 99A0179 or 99A1015

    The Primary Charge Roller is part of the laser cartridge.

    Neither one of those rollers is 1 1/8" in diameter though. Not even close. Cleaning will certainly do no harm, though.

  8. #8
    Jim Isbell
    Guest
    Then in the case of one of them, changing the toner cartridge would eliminate the problem. If that doesn't cure it then it at least narrows down the field. Thanks. I think that will help me a lot.

  9. #9
    Jim Isbell
    Guest
    OOPs, no, I miss read your post. You said the Laser Cartridge, not the Toner cartridge. As Gilda used to say......Nevermind...........

  10. #10
    Master Of The Obvious 10,000+ Posts
    Lexmark Optra T610 with marks on pages

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,795
    Rep Power
    380
    Sorry, for me laser cartridge = toner cartidge. Yes, that would rule out out the primary charge roller.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here