No unfortunately currently unable to get this board from Sharp or Hytec which I find unusual. So I did as you suggested and removed the upper web. So...
Agreed. The only time you usually see rocks like that is when the machine's internal temperature is too hot. Did you notice that that particular rock...
C2557 is a developer density code, so yes aftermarket toner would be a big factor. It's probably intermittent. Is the toner hopper binding up? It's a...
yes i have dealt with this a few times on units with high scan counts. the flat cable conductor runs crack internally. remove the brown tape and hold...
You might want to create a user specifically for the device to send with. If you have them use Direct Send that user does not need a mailbox. Direct...
Have you examined FUFM1 & FUFM2? It's not unheard of for fans fill with dust, get out of balance, and to fail. Especially near the fuser. Can you run...
Long time copier tech. Member of Copytechnet, http://dnet-km.com/eve, http://unitedtechsonline.com, http://conservativeindytechs.com/, http://copiertalk.com/forum/index.php?
Interests:
woodworking, exersize/health
Occupation:
chief kibitzer & troublemaker
What Year Did You Start in this Industry:
1989
Favorite Manufacturer:
Konica Minolta (as of right now)
Most Hated Brand:
Brother
What was the first machine you worked on:
Mita (before it was Kyocera-Mita)
Last machine you were formally trained on:
HP Pagewide XL8000
Gender:
Male
Signature
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Find latest posts
