It's the one behind the paper dust collector. You may find that it's necessary to clean the three sensors in that area. You separate the 2nd transfer...
Since the enduser is locked out of Admin functions anyway, I think I've covered my bases by requesting a new PS and a PCL driver installed and tested...
I have seen failures of the tiny gears that counter-rotate the separation tire. I had to take a photo of the gear then drag it as big as it would go...
J30-03 jams are usually caused by CL8 and/or the exit sensor (in one case both). But I would definitely install a second transfer roller. You'll want...
You can't really tell anything by looking at the upper developing roller. If you were to pull the developing unit during a jam or error condition you...
The tricky thing about developing units is that the developing roller counter-rotates, and rotates at a different rate than the drum. So essentially...
Long time copier tech. Member of Copytechnet, http://dnet-km.com/eve, http://unitedtechsonline.com, http://conservativeindytechs.com/, http://copiertalk.com/forum/index.php?
Interests:
woodworking, exersize/health
Occupation:
chief kibitzer & troublemaker
What Year Did You Start in this Industry:
1989
Favorite Manufacturer:
Konica Minolta (as of right now)
Most Hated Brand:
Brother
What was the first machine you worked on:
Mita (before it was Kyocera-Mita)
Last machine you were formally trained on:
HP Pagewide XL8000
Gender:
Male
Signature
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Find latest posts
