You say that it is a new machine. Did the skew problem appear upon initial testing in your office or after delivering it to your customer? If during...
Was there for fuser error, and customer brought this up. I tested and repeated what they were claiming. Can make copies all day long, no issue. If I...
I think my highest was under 4 mil on a bizhub 600. My most surprising are a pair of Lexmark x792's. I think the expected life of the box is 400,000....
To be honest with you, with this OLD machine over 1 mil, it's past time for an upgrade. These machines were horrible even when new, and had about 50...
The MP C6501 is famous for being a toner belching beast. Follow the service manual to remove the PCDU and separate the drum unit from the development...
Long time copier tech. Member of Copytechnet, http://dnet-km.com/eve, http://unitedtechsonline.com, http://conservativeindytechs.com/, http://copiertalk.com/forum/index.php?
Interests:
woodworking, exersize/health
Occupation:
chief kibitzer & troublemaker
What Year Did You Start in this Industry:
1989
Favorite Manufacturer:
Konica Minolta (as of right now)
Most Hated Brand:
Brother
What was the first machine you worked on:
Mita (before it was Kyocera-Mita)
Last machine you were formally trained on:
HP Pagewide XL8000
Gender:
Male
Signature
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Find latest posts
