Tab Content
  • mloudy's Avatar
    4 Days Ago
    mloudy replied to a thread BP-FN11 in Sharp
    Pretty sure this manual isn't on the US Sharp service site. At least I can't find it. When I printed it it called for A4 paper which also makes me...
    10 replies | 997 view(s)
  • mloudy's Avatar
    5 Days Ago
    mloudy replied to a thread SHARP 3110 SD CARD in Sharp
    You may also search for VHI0MFP00237C This is the updated part# All you really need is a new quailty SD card, a copy of the file and...
    2 replies | 288 view(s)
  • mloudy's Avatar
    5 Days Ago
    mloudy replied to a thread BP-FN11 in Sharp
    Appreciate it!
    10 replies | 997 view(s)
  • mloudy's Avatar
    5 Days Ago
    mloudy replied to a thread BP-FN11 in Sharp
    Where would someone find this manual on the Sharp Service website?
    10 replies | 997 view(s)
  • mloudy's Avatar
    5 Days Ago
    mloudy replied to a thread BP-FN11 in Sharp
    I would think they would be in stock soon in the EU as there are 37 in US stock. The Canon inner finisher L1 looks like a close match but I no...
    10 replies | 997 view(s)
  • mloudy's Avatar
    1 Week Ago
    We don't do any auto supply refill orders for our customers but we use several methods to track supply alerts. Machines send emails to a dedicated...
    11 replies | 939 view(s)
  • mloudy's Avatar
    1 Week Ago
    Now that I look at it G allows how far the breakdown is for toner remaining. 1% increments, 5% increments and 25% increments.
    11 replies | 939 view(s)
  • mloudy's Avatar
    1 Week Ago
    You might check SIM 26-69 G. This allows the selection of 1%, 5% or 25%.
    11 replies | 939 view(s)
  • mloudy's Avatar
    1 Week Ago
    We set all machines up with the following: 55-3 28 bit 3 to 1 - error reporting 1 time 32 bit 2 to 1 - toner MIB report 5%
    11 replies | 939 view(s)
  • mloudy's Avatar
    1 Week Ago
    mloudy replied to a thread BP70 touch screen freezes in Sharp
    We had one that were were able to save with a TP replacement. It has been working for 6 months. When the special TP FW was released our IT tech...
    4 replies | 643 view(s)
  • mloudy's Avatar
    2 Weeks Ago
    mloudy replied to a thread BP70 touch screen freezes in Sharp
    We have been dealing with this for a looong time. There are 3 bulletins regarding this. Ground issues, noise issues. There is special touch panel...
    4 replies | 643 view(s)
  • mloudy's Avatar
    2 Weeks Ago
    mloudy replied to a thread Sharp Spares in Sharp
    I have looked for that before. In my Parts Guide it is shown in section V30 with no part#. It is way more than just the rear frame. I am not sure I...
    3 replies | 650 view(s)
  • mloudy's Avatar
    2 Weeks Ago
    mloudy replied to a thread [Electrical] Lexmark XC9245 LCD in Lexmark
    So the link is a BG site and we use a US site. Lexmark Support | United States The GB site does not have the big red warning about the...
    6 replies | 582 view(s)
  • mloudy's Avatar
    2 Weeks Ago
    mloudy replied to a thread [Electrical] Lexmark XC9245 LCD in Lexmark
    The newest available in the US online is 230.207 What we were sent by our rep was 230.211 Where did you get 230.217? Was this from your service...
    6 replies | 582 view(s)
  • mloudy's Avatar
    2 Weeks Ago
    mloudy replied to a thread [Electrical] Lexmark XC9245 LCD in Lexmark
    We ran into this last week when we update a XM3250. Lexmark rep sent us unreleased firmware which corrected it. As of this morning there is now a...
    6 replies | 582 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    We ran into an issue with the newest firmware but only on one machine. Scrambled the display and it couldn't even be used. Known issue and we were...
    4 replies | 452 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    I have no idea but as long as there is an email address entered and the SMTP info is there the Admin Guide says it should allow the Test. I have...
    4 replies | 452 view(s)
  • bigdaddyooo's Avatar
    3 Weeks Ago
    bigdaddyooo replied to a thread BP-LC10 phantom jam in Sharp
    UPDATE........Fairly new. i think 80k on it. We removed it and put another brand new one on and customer has had no issues. We did however bring it...
    3 replies | 454 view(s)
  • bigdaddyooo's Avatar
    3 Weeks Ago
    The BP DSPF uses a different white ref chart than the MX's. Make sure you have the correct one
    5 replies | 611 view(s)
  • bigdaddyooo's Avatar
    3 Weeks Ago
    bigdaddyooo replied to a thread Cloning the SSD on BP's in Sharp
    Steve our rep advised us to NOT clone machines any longer. They are seeing a lot of problems with lock up, slow networking etc... if you saw the...
    8 replies | 707 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread Lexmark Maint kit in Lexmark
    The 41X2233 is the PM kit we use. 225K yield.
    4 replies | 726 view(s)
  • bigdaddyooo's Avatar
    3 Weeks Ago
    bigdaddyooo started a thread BP-LC10 phantom jam in Sharp
    We have an LC10 that jams for no reason it seems. Took it back to the shop and ran a few thousand with NO jams. Has anyone had any problems with this...
    3 replies | 454 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread BP70M31 Just the blue light in Sharp
    We had a BP-50C36 do this a month after it was installed. We replaced the DC power supply on 11/28/2022 and the machine hasn't has a service call...
    5 replies | 476 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread Lexmark MFP lease returns? in Lexmark
    If you are looking at the same off lease list that I am you can also seacrh for the XC4150. Same machine 10 pages per minute faster and comes with a...
    6 replies | 389 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread Lexmark MFP lease returns? in Lexmark
    At 100K they made need some work. ADF rollers, image units, toners... The thing is you can buy one with 5k-20K for the same price as one with 100K. ...
    6 replies | 389 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread Lexmark MFP lease returns? in Lexmark
    Some will go far beyond rated yield and some fail way too early. The fusrer problems we see are all premature failures and they are for the most part...
    6 replies | 389 view(s)
  • mloudy's Avatar
    3 Weeks Ago
    mloudy replied to a thread Lexmark MFP lease returns? in Lexmark
    The XC4140 is a good machine although a bit large and heavy as a desktop. We do have many sitting on desks but they require a solid foundation...
    6 replies | 389 view(s)
No More Results
About mloudy

Basic Information

Date of Birth
November 22, 1968 (55)
About mloudy
Real Name:
Mark Loudy
Country:
United States
Where are you from (City, State):
Greenville, OH
What Year Did You Start in this Industry:
1985
What was the first machine you worked on:
Underwood Touchmaster Five
Gender:
Male

Statistics


Total Posts
Total Posts
688
Posts Per Day
0.23
General Information
Last Activity
15 Hours Ago
Join Date
10-20-2015
Referrals
1

1 Friend

  1. bigdaddyooo bigdaddyooo is offline

    Senior Tech

    bigdaddyooo
Showing Friends 1 to 1 of 1
Page 1 of 2 12 LastLast

02-26-2024


02-22-2024


02-21-2024


02-20-2024


02-19-2024


02-16-2024


02-14-2024



Page 1 of 2 12 LastLast