View Profile: Oystercopy - Copytechnet.com

1 Week Ago

Oystercopy replied to a thread e-Studio 457, not fusing... in Toshiba

Went to the SECOND machine yesterday... same thing, machine set to 4 instead of 10. Too random to be a tech setting, so must have come from the...

19 replies | 490 view(s)

1 Week Ago

Oystercopy started a thread C-3110, 0101 code... in Konica Minolta

Hey guys. Haven't seen this code pop up before, but this is what the manual says: Description: Power malfunction When opening or closing the...

1 replies | 120 view(s)

1 Week Ago

Oystercopy replied to a thread C454e Cyan prints in Konica Minolta

The last couple times I had this issue, and it seems to happen more with Cyan for some reason, I replaced the DRUM and the Developer Unit together,...

32 replies | 874 view(s)

1 Week Ago

Oystercopy replied to a thread e-Studio 457, not fusing... in Toshiba

Yes, thanks for all that guys... I should not have had to mess with this, but I cannot say if a tech changed that setting from when the machine was...

19 replies | 490 view(s)

1 Week Ago

Oystercopy replied to a thread e-Studio 457, not fusing... in Toshiba

OK so just an update on one of these machines. I finally took the time to look through the service manual to find the fuser temperature adjustment,...

19 replies | 490 view(s)

1 Week Ago

Oystercopy replied to a thread e-Studio 457, not fusing... in Toshiba

Thanks Black Cat and TSB for the honest and helpful responses. Yes, I usually put the fuser tension spring on the tightest setting; usually...

19 replies | 490 view(s)

1 Week Ago

Oystercopy replied to a thread e-Studio 457, not fusing... in Toshiba

I would have specified if the customer was running thick stock; this is the only line item that would make any difference here. I also specified that...

19 replies | 490 view(s)

1 Week Ago

Oystercopy replied to a thread Bizhub C250i Fuser noise in Konica Minolta

This sounds like the classic fuser bearing noise that I've been hearing from everything from the -8 series forward. I usually disassemble and lube...

13 replies | 574 view(s)

1 Week Ago

Oystercopy started a thread e-Studio 457, not fusing... in Toshiba

Hey folks.. these machines have (relatively) new Fusers, but I'm still having offset issues on some of them. The usual fix is to make sure that...

19 replies | 490 view(s)

2 Weeks Ago

Oystercopy replied to a thread LJ 700 M712, background, bias-looking issue... in HP

Here's a pic of the original problem with background, that is, if the system will let me upload it! Never mind, the system is having issues...

6 replies | 195 view(s)

2 Weeks Ago

Oystercopy replied to a thread LJ 700 M712, background, bias-looking issue... in HP

2 brand new oem cartridges were installed.. People are not reading tonight😉😉

6 replies | 195 view(s)

2 Weeks Ago

Oystercopy replied to a thread LJ 700 M712, background, bias-looking issue... in HP

My posts referenced that they were both OEM cartridges Phil, so no generics being used.

6 replies | 195 view(s)

2 Weeks Ago

Oystercopy replied to a thread Konica c3350 printing extra pages - each with random parts of original documents in Konica Minolta

Personally, I don't know where the idea of NOT doing F/W is coming from? I take every single machine that I sell to the latest F/W before going out...

7 replies | 402 view(s)

2 Weeks Ago

Oystercopy started a thread LJ 700 M712, background, bias-looking issue... in HP

Machine has severe background/banding issues... Not entirely sure, but seems to go away when the "old" (empty) toner cartridge is installed back in...

6 replies | 195 view(s)

Oystercopy
Senior Tech
250+ Posts

Mini Statistics

Statistics

Total Posts

General Information

01-18-2021

01-15-2021

01-14-2021

01-08-2021

Oystercopy Senior Tech 250+ Posts

Mini Statistics

Statistics

Total Posts

General Information

01-18-2021

01-15-2021

01-14-2021

01-08-2021

Oystercopy
Senior Tech
250+ Posts