I was there for the brownout. AC voltages varied ... at first 53.5vac, then we got some surges, and it settled at 73.5vac
I disconnected motor loads...
If the post for the patch sensor breaks, the shutter does not open correctly you'll get very poor calibrations. Is this the modification that you're...
I'll second that. There's a great deal of spring tension on that pin. I was able to repair one by inserting a steel pin and securing it with epoxy. ...
No fuses that I can see, and it fails the smell test. It smells like that frosted raisin bread that I put in the toaster, and started to burn. Hytec...
That is so interesting!!! Let us know when you get it pinned down. I think I would have started with formatting the HDD, then reloading firmware. The...
Yes allan PCRs are charging rollers. They are hard one type not soft type like in Brother machines which I have no problems to clean with water/soft...
Anyone having success cleaning DR-316/K PCRs. Recently had one C250i with few thin lines on prints in paper feeding direction and traced the lines to...
Find latest posts
