Tab Content
  • repn1999's Avatar
    1 Week Ago
    repn1999 replied to a thread NX-4110 scanning Checks in Sharp
    you are running into counterfeit protection not allowing the job. basically it makes you scan/copy in black and white(Mono2) and at least 10 percent...
    5 replies | 1277 view(s)
  • repn1999's Avatar
    1 Week Ago
    I have seen this issue twice on the orion series machines. one would think it is the fuser.....but no. What fixed it for us was replacing the dv...
    3 replies | 188 view(s)
  • repn1999's Avatar
    2 Weeks Ago
    use the Sharp AR620LH as stated by bil. After market ones are crap. do yourself a favor and get oem for UH and LH. they will run way longer.
    3 replies | 280 view(s)
  • repn1999's Avatar
    2 Weeks Ago
    repn1999 replied to a thread Mx 3140 display not working in Sharp
    i second the dc power supply. these machines are terrible when it comes to the dc board blowing. I have probably changed out a couple dozen. i have...
    12 replies | 1523 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread SHARP MX2614 - NO POWER!! in Sharp
    fixed this issue many times....always dc power supply. there is an updated part which seems to fail much less. hytec is a cheaper option but you may...
    7 replies | 696 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread [Misc] Sharp MX-3570 in Sharp
    beware of using aftermarket toners on these models. they give nothing but headaches and can cause this issue.
    3 replies | 360 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    i would recommend trying to run 50-28 adjustments and see if this resolves it. I had a 3070 doing something similar and while they dont have 50-28,...
    4 replies | 733 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread mx-m654 won't 'add staples' in Sharp
    depending on the finisher.....the fn22 has a weird issue that shows this exact problem...however...its not the stapler or the flag on it or the...
    4 replies | 305 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    to add....make sure its the correct deck. i believe the 5111 deck will work on that machine physically and will plug in but it wont function.
    3 replies | 234 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    clean the optics with alcohol and a soft white cloth. do not use any chemicals or colored rags. this should fix it.
    7 replies | 372 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread Sharp mxm 623 in Sharp
    check torque limiters in the lcc1 and lcc2 trays and replace the tandem paper feed drive unit. the tandem drive unit has been a common point of...
    11 replies | 490 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    I have worked on 100's of these machines and encountered this issue and even escalated to our DSS with Sharp. Here is what we have found fixes it. ...
    21 replies | 1352 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread MX-6070N Copy Quality in Sharp
    Dumb question but are you using SHARP Genuine toners in this machine and not aftermarkets? Also is firmware updated?
    9 replies | 608 view(s)
  • repn1999's Avatar
    3 Weeks Ago
    repn1999 replied to a thread MX-2640 tray 1 not detected in Sharp
    might also help to make sure your trays are set to inch and not ab. I have seen this cause weird issues before.
    6 replies | 309 view(s)
  • ZOOTECH's Avatar
    3 Weeks Ago
    ZOOTECH replied to a thread Sharp MX-M904 Still Good? in Sharp
    I believe that is the one, but you should check with a current tech/dealer - I've been retired 3.5 years without access to latest bulletins.
    17 replies | 1032 view(s)
  • ZOOTECH's Avatar
    3 Weeks Ago
    If you find out the average tech pay for that area, make a deal with the owner that you will accept that pay for 3-6 months, and if you have exceeded...
    5 replies | 312 view(s)
  • ZOOTECH's Avatar
    3 Weeks Ago
    ZOOTECH replied to a thread Sharp MX-M904 Still Good? in Sharp
    You may need the LCT Mounting kit (RB16), if I remember correctly.
    17 replies | 1032 view(s)
No More Results

4 Visitor Messages

  1. Hi repn1999!, Can you giveme the User and Password for FTP server of Sharp Frimwares, please??
  2. I need your help with this, I need the firmware for mx-4111n
    ahmadalqobate76@gmail.com

  3. View Conversation
    I need your help with this, I need the firmware for ARM-355/455. Your help is greatly appreciated.
    Thanks
    silverboss007@gmail.com
  4. View Conversation
    Hi,Can you help me by Providing information regarding copying of Harddisk, I shall be really greatful.Regards. My mail is aosmani@rediffmail.com
Showing Visitor Messages 1 to 4 of 4
About repn1999

Basic Information

Age
39
About repn1999
Real Name:
Wes
Country:
United States
Where are you from (City, State):
Dallas, TX
Occupation:
Senior Image Integration Specialist
What Year Did You Start in this Industry:
2007
Favorite Manufacturer:
Sharp
Most Hated Brand:
KM
What was the first machine you worked on:
SF2040
Last machine you were formally trained on:
MX-6070N
Gender:
Male

Statistics


Total Posts
Total Posts
243
Posts Per Day
0.07
Visitor Messages
Total Messages
4
Most Recent Message
05-30-2019
General Information
Last Activity
1 Week Ago
Join Date
05-24-2010
Referrals
0

4 Friends

  1. GREATMAN GREATMAN is offline

    Technician

    GREATMAN
  2. Jas Jas is offline

    Junior Member

    Jas
  3. techmann techmann is offline

    Technician

    techmann
  4. ZOOTECH ZOOTECH is online now

    Senior member of CRS

    ZOOTECH
Showing Friends 1 to 4 of 4

09-11-2019


09-08-2019


09-02-2019


08-30-2019