View Profile: Synaux - Copytechnet.com

3 Hours Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

5505ci Skewing from all trays *&%&%& 3050ci with skewed image.. HELP *&%&%& 3050ci with skewed image.. HELP I was only a small voice of...

28 replies | 594 view(s)

4 Hours Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

The same applies equally to the other Alphard family machines. =^..^=

28 replies | 594 view(s)

4 Hours Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

Nope. Tray #1 and tray #2 (upper & lower trays in the main body). =^..^=

28 replies | 594 view(s)

4 Hours Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

I have a suggestion, if you're ready for another task: Compare the feed units between the 355ici and the 5551ci. Take special note of the (5)...

28 replies | 594 view(s)

4 Hours Ago

blackcat4866 replied to a thread Taskalpha 356ci- Black toner empty in Kyocera Mita, Copystar

True. There is a little more to it though. If the rubber wiper comes off or is damaged it leaves a layer of unagitated developer setting right on...

13 replies | 234 view(s)

4 Hours Ago

blackcat4866 started a thread KM-3552ci jams 0512, 0502 in Kyocera Mita, Copystar

It sorta makes sense when you think about it: Here's a machine with 40K on the rollers (and they are NOT flattened, like they could be). Every...

0 replies | 35 view(s)

5 Hours Ago

blackcat4866 replied to a thread toshiba E Studio 555. code F070 need to reset in Toshiba

It sounds to me like you've got a paperweight. =^..^=

3 replies | 111 view(s)

5 Hours Ago

blackcat4866 replied to a thread Taskalpha 356ci- Black toner empty in Kyocera Mita, Copystar

I'm having a different read: 1) I suspect that the toner hopper is working properly taking the toner from the bottle. 2) If you can pour some...

13 replies | 234 view(s)

1 Day Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

Agreed. The only reason that I've ever changed a Kyocera laser is if the cleaners fail. Clean the worm with alcohol then grease with the white...

28 replies | 594 view(s)

1 Day Ago

blackcat4866 replied to a thread Let's Play a Game (Taskalpha 3551ci) in Kyocera Mita, Copystar

Yes the individual laser sections are interchangeable. =^..^=

28 replies | 594 view(s)

1 Day Ago

EarthKmTech replied to a thread c3350 and c3351 transfer belts interchangeable? in Konica Minolta

side by side i see the difference. the cleaning section was completely redesigned on the c3351 including a larger diameter exit for the waste...

1 replies | 77 view(s)

1 Day Ago

EarthKmTech started a thread c3350 and c3351 transfer belts interchangeable? in Konica Minolta

I see they have different part numbers, the problem is i need a c3351 belt and only have a c3350 belt (old machine not i series) will it fit and...

1 replies | 77 view(s)

1 Day Ago

blackcat4866 replied to a thread MJ-1112 ribbon cable in Toshiba

Yes, I saw that. If it was HP you'd have to buy the whole finisher. =^..^=

6 replies | 175 view(s)

1 Day Ago

blackcat4866 replied to a thread Not a newbie, but TABS tech forums are screwed up in Newbie Check In!

Welcome! =^..^=

7 replies | 176 view(s)

1 Day Ago

blackcat4866 replied to a thread testing my new lap top with this forum in Ricoh, Savin, Gestetner, Lanier

Its somewhere between 12 and 24 hours in which you can edit a post. After that timespan only the administrator can edit. =^..^=

10 replies | 333 view(s)

1 Day Ago

blackcat4866 replied to a thread e-Studio 457, not fusing... in Toshiba

I wonder why it was so low? Good catch. =^..^=

17 replies | 365 view(s)

2 Days Ago

blackcat4866 replied to a thread C554e j12-01 in Konica Minolta

I had a bizhub 454e that was wearing the separation roller for tray #1 tapered in 15K pages or less. Upon examining the feed assembly you could see...

11 replies | 299 view(s)

2 Days Ago

blackcat4866 replied to a thread e-Studio 457, not fusing... in Toshiba

Needless to say, the wrong model fuser will cause poor fusing, 30 minute "Please Wait." intervals, and eventually wearing out the helical drive gear...

17 replies | 365 view(s)

2 Days Ago

blackcat4866 replied to a thread e-Studio 457, not fusing... in Toshiba

Three things that I would check: 1) There are two attachment hooks for the fuser pressure springs ... is it on the tighter setting? 2) I've had...

17 replies | 365 view(s)

2 Days Ago

blackcat4866 replied to a thread MJ-1112 ribbon cable in Toshiba

That's RIBON. It's a Toshiba proprietary application that organizes you parts manuals into a single application. =^..^=

6 replies | 175 view(s)

3 Days Ago

blackcat4866 replied to a thread 2540 adding toner in Kyocera Mita, Copystar

1/3 to 1/2. Yes, let it run. It's mono-component toner, and the developing unit comes empty. Also keep in mind that you'll usually get some...

4 replies | 161 view(s)

3 Days Ago

blackcat4866 replied to a thread HP vs Canon plotters in Canon

Very similar build. The software for the HP is friendlier, and the error codes seem to point to something specific. On the Canons the service mode is...

1 replies | 128 view(s)

3 Days Ago

blackcat4866 replied to a thread 2540 adding toner in Kyocera Mita, Copystar

I'll bet that you didn't run U130 to fill the new developing unit with toner. I will do it eventually, it will just take a really long time. =^..^=

4 replies | 161 view(s)

3 Days Ago

blackcat4866 replied to a thread MJ-1112 ribbon cable in Toshiba

How about this?: 6LK58211000 Literally the last item in the catalog. =^..^=

6 replies | 175 view(s)