Looking for a black drum for a MFX-C2828. Backordered??

[allstar59]

Hello everyone,

Recently I've inherited an account that has a MFX-C2828 from a competitor.

I do almost exclusively Kyocera but I have to work on this one until they can get out of their lease. The replace K drum light came on and my supplier says they're back ordered from Muratec with no ETA...
Will a KM drum work if so which drum will cross? Or does someone have a supplier that has one in stock? Thanks, for any help.

Jim

[TRJS]

Re: Looking for a black drum for a MFX-C2828. Backordered??

Same as BH C280 you will have to cut off some of the front cover on drum to make fit. done it many times.

[allstar59]

Re: Looking for a black drum for a MFX-C2828. Backordered??

Thanks, I'll give it a try.

Jim

[allstar59]

Re: Looking for a black drum for a MFX-C2828. Backordered??

Hey is the piece that needs to be cut on the front or rear of the drum? I swapped the blue cover and it still won't quite go in all the way

[allstar59]

Re: Looking for a black drum for a MFX-C2828. Backordered??

Hey is the piece that needs to be cut on the front or rear of the drum? I swapped the blue cover and it still won't quite go in all the way

Never mind.... got it