Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jul 2008
    Location
    orlando
    Posts
    21
    Rep Power
    28

    Muratec mfx 1700 driver install

    I have loaded drivers but won't print. I can ping it. Is there a special port or something? I only work on Konica usually, but...

  2. #2
    Field Supervisor 500+ Posts
    Muratec mfx 1700 driver install

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    886
    Rep Power
    38
    Yes it is special depending on the type, usually a special ob_ip port, it wont work with a standard tcp/ip port usually.

    A.

  3. #3
    Technician
    Join Date
    Jul 2008
    Location
    orlando
    Posts
    21
    Rep Power
    28

    Muratec 1700

    Thanks for the reply.

    Could you walk me through? I am only a tech, not very good with ip stuff. I set up the driver for tcp/ip, raw, port 9100, snmp enabled. I can ping the printer address, but no print. Thanks for your help, I have a customer screaming.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here