Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jul 2008
    Location
    orlando
    Posts
    21
    Rep Power
    27

    Muratec mfx 1700 driver

    Trying to load drivers and print to Muratec mfx 1700. Customer moved equipment to new location and now won't print. I installed the drivers and set up a tcp/ip address, set to raw, port 9100, enabled snmp. I can ping the printer address on the printer, but can't print. I am a copier tech, not very good with ip stuff.

  2. #2
    Software/IT 50+ Posts jneezy2008's Avatar
    Join Date
    Mar 2009
    Location
    Bonita Springs, FL
    Posts
    72
    Rep Power
    26
    From my past experiences with Muratecs, you have to install the drivers from the OfficeBridge(OB) installation CD, unless there's been a PCL board installed in to the Muratec which allows you to use a standard TCP/IP port versus the proprietary Muratec OB port. Download the MFX-1700 OB CD from Muratec.com - Support and run the setup. **remember to choose "network", not "local"**

  3. #3
    ahkloan
    Guest
    Thanks for sharing the link to the muratec cd's. I needed it for my MFX-1600 machine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here