I have a Kyocera M3655idn.
Screen stuck on welcome.
Machine has USB ports blocked(Bank).
Can not upgrade firmware thru USB port.
Can not get into Simulation to clear memory and hard drive.
No network connection.
Thanks in advance.
I have a Kyocera M3655idn.
Screen stuck on welcome.
Machine has USB ports blocked(Bank).
Can not upgrade firmware thru USB port.
Can not get into Simulation to clear memory and hard drive.
No network connection.
Thanks in advance.
Wrong forum.
Post here:
https://www.copytechnet.com/forums/k...mita-copystar/
Good luck
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Author just copy-pasted his thread in right forum after my post.
Nothing wrong here Phil. If mods were available normally someone just would move his thread to the right place but we have only Aneurysm... so let it be Brother.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks