Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jul 2020
    Location
    Wembley
    Posts
    10
    Rep Power
    1

    Ricoh mpc3001 insert photoconductor correctly

    Hi everyone, I am fairly new to the forum and I am working on a Ricoh mpc3001 which says insert cyan and magenta photoconductors even though I've changed the drums. does anyone have any ideas on this please? As I say I have have tried other drums and cleaned the connector at the back. Thank you.

  2. #2
    Copier Technician 500+ Posts
    Ricoh mpc3001 insert photoconductor correctly

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    769
    Rep Power
    75

    Re: Ricoh mpc3001 insert photoconductor correctly

    Quote Originally Posted by Copyme View Post
    Hi everyone, I am fairly new to the forum and I am working on a Ricoh mpc3001 which says insert cyan and magenta photoconductors even though I've changed the drums. does anyone have any ideas on this please? As I say I have have tried other drums and cleaned the connector at the back. Thank you.
    Hello you are the wrong forum this is for new users to say hello

  3. #3
    Service Manager 5,000+ Posts
    Ricoh mpc3001 insert photoconductor correctly

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    9,940
    Rep Power
    231

    Re: Ricoh mpc3001 insert photoconductor correctly

    Quote Originally Posted by Copyme View Post
    Hi everyone, I am fairly new to the forum and I am working on a Ricoh mpc3001 which says insert cyan and magenta photoconductors even though I've changed the drums. does anyone have any ideas on this please? As I say I have have tried other drums and cleaned the connector at the back. Thank you.
    mga is correct about this being " Newbie Check In " forum. The name of the forum is just that, where newbies say hello ... tell us a little about themselves.

    it also appears you haven't registered your profile... please do so.

    you should also read ALL forum rules here ---> https://www.copytechnet.com/forums/misc.php?do=vsarules

  4. #4
    Technician
    Join Date
    Jul 2020
    Location
    Wembley
    Posts
    10
    Rep Power
    1

    Re: Apology

    Quote Originally Posted by Phil B. View Post
    mga is correct about this being " Newbie Check In " forum. The name of the forum is just that, where newbies say hello ... tell us a little about themselves.

    it also appears you haven't registered your profile... please do so.

    you should also read ALL forum rules here ---> https://www.copytechnet.com/forums/misc.php?do=vsarules

    Hi there
    As I mentioned , I am new to the forum, I only started this month so it's no surprise to me at least that I have made a little mistake in inadvertently posting a question via the newbie forum. Thanks for pointing this out however I can't see which rule of the 10 listed I have broken? Not to worry, I won't break any rules in future !

  5. #5
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,330
    Rep Power
    305

    Re: Apology

    Quote Originally Posted by Copyme View Post
    Hi there
    As I mentioned , I am new to the forum, I only started this month so it's no surprise to me at least that I have made a little mistake in inadvertently posting a question via the newbie forum. Thanks for pointing this out however I can't see which rule of the 10 listed I have broken? Not to worry, I won't break any rules in future !
    What part of Newbie Check In do you lack the intelligence to understand? As for the Forum Rules, breaking them will get you Red Carded and might even get you reported. You get lectured for protocol mistakes.

  6. #6
    Copier Technician 500+ Posts
    Ricoh mpc3001 insert photoconductor correctly

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    769
    Rep Power
    75

    Re: Apology

    Quote Originally Posted by slimslob View Post
    What part of Newbie Check In do you lack the intelligence to understand? As for the Forum Rules, breaking them will get you Red Carded and might even get you reported. You get lectured for protocol mistakes.
    Agreed he has changed title to apology give the new user a chance would be nice for him to register

  7. #7
    Service Manager 5,000+ Posts
    Ricoh mpc3001 insert photoconductor correctly

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    9,940
    Rep Power
    231

    Re: Apology

    Quote Originally Posted by Copyme View Post
    Hi there
    As I mentioned , I am new to the forum, I only started this month so it's no surprise to me at least that I have made a little mistake in inadvertently posting a question via the newbie forum. Thanks for pointing this out however I can't see which rule of the 10 listed I have broken? Not to worry, I won't break any rules in future !
    Copyme

    Forgive me if you mis-understood my mean of " review forum rules " This is something I tell ALL newbies here.

    Sir, you ( other than incomplete profile which is NOT an infraction ) to my knowledge you haven't broken any rules.

    Thanks for understanding

    Phil B.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here