Paddle in Trailing Edge stopper/C (FS-534 exit assembly) coming out causing the assembly to get caught and generating code. Don't see why this is happening.
Paddle in Trailing Edge stopper/C (FS-534 exit assembly) coming out causing the assembly to get caught and generating code. Don't see why this is happening.
Welcome to the site.
--
Snap, Crackle, Aneurysm!
there's a bulletin out for this, there are screw holes near the sorter exit that the paddle mount gets stuck in. On newer sorters they beveled the edge of the hole so when the paddle assy goes in the hole it can come back out on it's own. for older sorters, there is a real small magnet KM made that looks like a watch battery. You just stick that magnet onto the screw of the offending screw hole and you'll be ok.
Welcome to CTN!!
Do for one what you wished you could do for everyone. - Andy Stanley
Welcome !!!!!!
Tell us about yourself .
What models do you work on ?
How long in the Biz ?
"The Serenity Prayer" . . .
God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .
Should of checked with the thread earlier. I ended up replacing the Paper Exit Unit. It's been a couple of days and the customer hasn't called back. If it does I'll go with what was suggested. Thanks.
Worked in the biz for around 7 yrs now. I've had my hands on pretty much all the Konica Minolta machines now. Though I don't do much production any more.
you are most welcome
Blaze, can you tell me what tech buliten this is on? im having trouble finding it.
Cheers
Bookmarks