This printer is stuck in "Initializing". Won't come out until it has done this over and over and over. Then it will have so much blue toner jammed in the toner waste, that it gives a replace toner waste bottle message.
Then we empty out the toner waste and unjam the toner waste tubes, that are now packed full of blue toner, jamming up the gears that turn the toners waste tube augers. After that is all cleared out and the toner waste message
is gone, it goes into the "Initializing" message and/or please wait, Initializing. And it again starts with the blue toner filling up the tubes again. It never comes out of Initializing. We did have a HVU board, but no good for this problem.
Please, somebody tell me you know what will fix this problem.
Bookmarks