Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts Jerrygbs's Avatar
    Join Date
    Dec 2008
    Location
    grantville, ga
    Posts
    191
    Rep Power
    0

    fujitsu scanner fi-6130 constant P in display

    Changed feed tires and drive tires, after reinstalling these parts the machine starts to cycle but stops on P. It should go 8 then P then 0 then 1. Also the lamps are staying on and won't turn off until adf opened. I'm a Canon copier tech just didn't see a place for scanners

  2. #2
    Service Manager 10,000+ Posts
    fujitsu scanner fi-6130 constant P in display

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,657
    Rep Power
    658

    Re: fujitsu scanner fi-6130 constant P in display

    Quote Originally Posted by Jerrygbs View Post
    Changed feed tires and drive tires, after reinstalling these parts the machine starts to cycle but stops on P. It should go 8 then P then 0 then 1. Also the lamps are staying on and won't turn off until adf opened. I'm a Canon copier tech just didn't see a place for scanners
    check sensors .. sounds like one isn't registering properly

  3. #3
    Senior Tech 100+ Posts Jerrygbs's Avatar
    Join Date
    Dec 2008
    Location
    grantville, ga
    Posts
    191
    Rep Power
    0

    Re: fujitsu scanner fi-6130 constant P in display

    Quote Originally Posted by Phil B. View Post
    check sensors .. sounds like one isn't registering properly
    Thank you sir, after taking it apart found a pinched wire in the ccd harness

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here