Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Feb 2020
    Location
    Reading
    Posts
    1
    Rep Power
    0

    Fujitsu N7100 Scanner Factory Reset (without Password)

    Hi,

    Can anyone advise how I reset a Fujisu N7100 Scanner back to factory default without using the Admin Password?

    Thanks
    Tony

  2. #2
    Junior Member
    Join Date
    May 2022
    Location
    ZH
    Posts
    1
    Rep Power
    0

    Re: Fujitsu N7100 Scanner Factory Reset (without Password)

    Quote Originally Posted by TonyKennard View Post
    Hi,

    Can anyone advise how I reset a Fujisu N7100 Scanner back to factory default without using the Admin Password?

    Thanks
    Tony
    I have the same question, did you figure out how to do this Tony?

  3. #3
    Junior Member
    Join Date
    May 2023
    Location
    Stuttgart
    Posts
    1
    Rep Power
    0

    Re: Fujitsu N7100 Scanner Factory Reset (without Password)

    Hi!
    Any news about how reset the Fujitsu N7100 Network Scanner ?
    Thanks a lot

    Answer to me self ...

    Fujitsu N1800 / N7100 etc ...

    user: Admin
    password: ALT+1, CTRL+2, ALT+3, CTRL+4, ALT+3, CTRL+2, ALT+1

    Source: https://youtu.be/iyYECHPUPcM
    Last edited by neuling; 05-04-2023 at 08:08 PM.

  4. #4
    Junior Member
    Join Date
    Jan 2024
    Location
    Dallas,TX
    Posts
    1
    Rep Power
    0

    Re: Fujitsu N7100 Scanner Factory Reset (without Password)

    I followed the exact procedure on my Fujitsu N7100 but with no luck. Goes on to say unable to connect LDAP server. Is there a trick to entering the password? Any tips or tricks

    Quote Originally Posted by neuling View Post
    Hi!
    Any news about how reset the Fujitsu N7100 Network Scanner ?
    Thanks a lot

    Answer to me self ...

    Fujitsu N1800 / N7100 etc ...

    user: Admin
    password: ALT+1, CTRL+2, ALT+3, CTRL+4, ALT+3, CTRL+2, ALT+1

    Source: https://youtu.be/iyYECHPUPcM

  5. #5
    Junior Member
    Join Date
    Jan 2024
    Location
    kalamazoo
    Posts
    1
    Rep Power
    0

    Re: Fujitsu N7100 Scanner Factory Reset (without Password)

    Hello,

    I have 2 of units they have the same issue if you use the factory default admin log and password as suggested buy the Fujitsu help desk. You are able to restore to factory in the admin panel but I get: "an error was detected scanner alert monitor" warning on startup. You can bypass it but Fujitsu says it needs service. However the unit would boot fine prior to the admin reset. Anyone else have this issue? Find a solution?

    2.jpg

    Initial Factory response, same as above post does not work on my scanners. I think the video unit is logging in as a user:

    To reset the N7100 series scanners back to factory defaults do the following:
    Warning! DO NOT use this procedure to do a password reset! For password reset issues see {[KBID 520235]}

    The following steps will cause data and/or system configuration loss and cannot be undone. This should only be used as a last resort!

    Note: Using an external KB can make this process easier on certain scanner models

    1. At the network scanner touch screen log on prompt, enter Admin as the user name.
    2. For the password, enter Alt+1, CTRL+2, ALT+3, CTRL+4, ALT+3, CTRL+2, ALT+1
    3. Press [Login].
    4. It will now ask you if it is ok to overwrite your data, click [OK] and the scanner will reboot to a factory default state.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here