Likes:
0
Dislikes:
0
-
OKIdata C532 "Image Drum Sensor Error"
Having a problem with a C532 giving a "Image Drum Sensor Error" message for the Magenta unit. Customer said they already changed the drum unit and still the problem did not go away. Made sure the firmware was up to date and cleaned and inspected all contact points and they were OK. Not sure what to check or change next.
Thanks
-
Senior Tech
100+ Posts
- Rep Power
- 35
Re: OKIdata C532 "Image Drum Sensor Error"
I would make sure it was the drum they replaced.Many times I have had customers replace toner when it says to replace drum.
-
Re: OKIdata C532 "Image Drum Sensor Error"
They just brought by the old unit they took out and it was indeed the Magenta drum unit.
-
Re: OKIdata C532 "Image Drum Sensor Error"
You can hear it adding Magenta toner and the Magenta drum unit is turning. I know it is the Magenta toner it is adding because if you dump some of the toner out and put the cartridge back in and close the lid and you can hear the clicking noise as it adds toner and then the drum unit if full when you take the toner cartridge out. But if you take the toner cartridge out and close the lid you do not hear the clicking noise any more.
-
Senior Tech
100+ Posts
- Rep Power
- 29
Re: OKIdata C532 "Image Drum Sensor Error"
[QUOTE = kuby; 1487540] Puoi sentirlo aggiungere toner magenta e il gruppo tamburo magenta sta girando. So che è il toner magenta che sta aggiungendo perché se si scarica un po 'di toner e si reinserisce la cartuccia e si chiude il coperchio e si sente il rumore del clic mentre aggiunge il toner e quindi il gruppo tamburo se pieno quando si prende la cartuccia del toner è esaurita. Ma se si estrae la cartuccia del toner e si chiude il coperchio, non si sente più il rumore del clic. [/ QUOTE]
sure new drum and toner is original?
most problems whit docking, does not open the drum window for toner charging
-
Re: OKIdata C532 "Image Drum Sensor Error"
Both drum and toner are OEM.
-
Re: OKIdata C532 "Image Drum Sensor Error"
Anybody seen this. Can not get past the error.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks