OKI B731 Power Off/ON 010:Error

[ignacio.cortez]

I got an OKI B731 with an Interesting Error
It's Behaving like an HP 49 Error

If device is not connected to the network, it sits at a Ready Mode and I am able to print reports with no issue, however if I
connect the Network(RJ45) Cable, it might print 1 or a few pages before it goes to

Power Off/On
010:Error
PC:008fd178
LR:008fd1b0
FR:008fa1e8

I googled the issue and on similar printers, it recommends replacing a board, however, I connected a backup printer
that works and configured it for that device's network settings and it displays the same error

I've even done a Memory reset on the device, still shows error.

Anyone has had this issue before?

you can email me at
ignaciomcortez@gmail.com

[Lance15]

On HP's that show a 49 error, there is usually a corrupted job sitting in a print que on a PC somewhere.

[ignacio.cortez]

On HP's that show a 49 error, there is usually a corrupted job sitting in a print que on a PC somewhere.

Yes, I am well aware of the HP 49 error and how to get past it, as I mentioned on the Original Post, I was inquiring if the above error was the OKI version of the HP 49 error
after multiple tries and multiple printer swaps, I was able to just "CANCEL" the printjob on the printer, but it took several tries to erase the complete job, since it was not on
the Printer's Print Queue on the server

So, my conclusion seems to be that, in fact, since the error is acting like an HP 49 Error, it can be treated as such and once the Corrupt Print Job has been cleared, printer will
return to normal.

I am wondering now if there would be a FIRMWARE Update that would help to alleviate this error in the future.