plockmatic BM50 SHARP error code bm-012

[neilobusk]

Hi all

intermittant one this not actually seen the fault...

machine stops and shows this code

paper is stopped under staplers.. not mis- aligned or jammed not sure if it isstapled or not ?

have service manual..we are a sharp dealer.. and some training with this monster

code points to a transport motor BM-012 Set Transport Motor (M5) Pulse Time Out Q40 service manual..

anyone any experience of this code.. we have limited experience of this contraption...

as i say intermittant.. happened last time 3 times out of 100 booklets

customer using quality mondi paper also 100gm

muchas gracias

Neilo

[maxvuurmans]

Did you get this fixed? We are having the same issue.

[Phil B.]

Did you get this fixed? We are having the same issue.

2 YEARS... only post.. no resolution

maybe best if you start your own new thread ..

PLEASE posts any:

error codes

any repair done

status of the consumables

pics in PDF format of quality issues

Normally we would have let the thread stay in it's grave.

[neilobusk]

Hi

I left that company shortly after..
The issue when I worked there was raised with Sharp as plockmatic was hooked up to an Mx-6500
It was intermittant and next to impossible to diagnose.
Sharp said maybe firmware..On the copier ? but we had the latest installed
they supplied the plockmatic On the copier
we had no direct contact with plockmatic themselves
For all I know the problem is there..
me posting that the problem is now with the manufacturer does not help anyone..
If I knew what solved the problem I would have posted it..

Thanks

Neil