Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    OKI C9650 LED Head Replacement

    unwork_inc's Avatar
    Join Date
    Nov 2016
    Location
    Portland, Oregon
    Posts
    43
    Rep Power
    8

    OKI C9650 LED Head Replacement

    It seems like one of the LED heads on my OKI C9650 got damaged so it needs to be replaced. I have a set of LED heads from another C9650 I've been using for parts, but I've never swapped the LED head. Besides being very careful when swapping them as to not scratch the black strip, are there any more complex settings I should look into (RAM reset, etc.) or just swapping them will suffice?

    Thanks in advance

  2. #2
    Master Of The Obvious 10,000+ Posts
    OKI C9650 LED Head Replacement

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,171
    Rep Power
    311

    Re: OKI C9650 LED Head Replacement

    Just be very very careful with the ribbon cables and connectors. It self-calibrates. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    OKI C9650 LED Head Replacement

    unwork_inc's Avatar
    Join Date
    Nov 2016
    Location
    Portland, Oregon
    Posts
    43
    Rep Power
    8

    Re: OKI C9650 LED Head Replacement

    Thank you very much - I'll go ahead then and replace the damaged head

  4. #4
    Service Manager 5,000+ Posts
    OKI C9650 LED Head Replacement

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    7,904
    Rep Power
    166

    Re: OKI C9650 LED Head Replacement

    Quote Originally Posted by unwork_inc View Post
    It seems like one of the LED heads on my OKI C9650 got damaged so it needs to be replaced. I have a set of LED heads from another C9650 I've been using for parts, but I've never swapped the LED head. Besides being very careful when swapping them as to not scratch the black strip, are there any more complex settings I should look into (RAM reset, etc.) or just swapping them will suffice?

    Thanks in advance
    nope. biggest problem is getting the FCC in place without buggering up the end.

    now IF you DO bugger it up..wrap masking tape over the buggered end... take to a flatbed paper cutter ( big handled sucker ) and carefully cut the very end off
    re insert

    machine takes it from there

  5. #5
    Technician
    OKI C9650 LED Head Replacement

    unwork_inc's Avatar
    Join Date
    Nov 2016
    Location
    Portland, Oregon
    Posts
    43
    Rep Power
    8

    Re: OKI C9650 LED Head Replacement

    Thanks everyone - I was careful and didn't mess up anything when replacing the head. Printer is now working well.

  6. #6
    Master Of The Obvious 10,000+ Posts
    OKI C9650 LED Head Replacement

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,171
    Rep Power
    311

    Re: OKI C9650 LED Head Replacement

    Quote Originally Posted by unwork_inc View Post
    Thanks everyone - I was careful and didn't mess up anything when replacing the head. Printer is now working well.
    Congratulations on your success! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Service Manager 5,000+ Posts
    OKI C9650 LED Head Replacement

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    7,904
    Rep Power
    166

    Re: OKI C9650 LED Head Replacement

    Quote Originally Posted by unwork_inc View Post
    Thanks everyone - I was careful and didn't mess up anything when replacing the head. Printer is now working well.
    Congrats!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here