Good day
I hope im on the right form as i am a new user
i have a Kyocera FS 4200dn that is giving me a headache , client reported that the printer is not printing correctly i.e the heading of the letter head starts printing in the middle of the page , i have replaced all the clutches and feed rollers and made no difference at all , its almost as if the paper is fed too early or the machine starts printing too late
any suggestions and assistance will be appreciated
Does it do it on a status page?
Does the paper size match the paper size dial? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
one of the first things checked so yes paper sizes matchOriginally Posted by blackcat4866
hi there , yes does it on all pages printed , from PC and from the reports
I had a similar case where you also had a weird noise. It turned out to be the main drive in my case.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks