I got an Oce plotwave 360 that’s has no life except for the soft power switch blinking, and leds on the spider board. I have no access to service manuals so I’m goin in blind. On the regulated ps I get AC 118V in through the main relay and fuses. So I know it’s getting the signal to come on. There are two SSR’s mounted on ps. I get 59V’s ac coming off one but I don’t seem to get anything off the other , although it’s very difficult to measure due to location and not having a diagram. These ps cost a lot of money so I’m extra cautious when working live. Can any help me with a diagram or with anything that may be helpful? I’m under a lot of pressure to get this going and besides putting out thousands of dollars buying boards I need to pinpoint the exact problem and even if possible the exact component on ps. They cost so much and I can’t find a used one that I’m going old school if I have to and repair it myself like we had too back in the day. Lol thanks
Bookmarks