What type of pico fuse do I need to reset Okidata color transfer belts

[Samanator]

What type of pico fuse do I need to reset Okidata color transfer belts?
I'm talking like the Okidata MPS4242mc or the MPS3537mc.
Also, where is the best place to get those fuses?

Thanks a bunch in advance.

[scanmc]

What type of pico fuse do I need to reset Okidata color transfer belts?
I'm talking like the Okidata MPS4242mc or the MPS3537mc.
Also, where is the best place to get those fuses?

Thanks a bunch in advance.

I bet it is probably the same as the C9600/9800 series type of fuse. Oki really hasn't changed their engine technology in quite a while. I Googled it and had a couple of places selling those.
I remember using pico fuses for the old Konica DI350 series drum kits for resetting Oki transfer belts. Good luck

[skynet]

I bet it is probably the same as the C9600/9800 series type of fuse. Oki really hasn't changed their engine technology in quite a while.

The OKI es 3452 uses three fuses all the same for drum, fuser and transfer belt. They look like this



and are available from RS Components part no 7383068

[Samanator]

The OKI es 3452 uses three fuses all the same for drum, fuser and transfer belt. They look like this



and are available from RS Components part no 7383068

Thank you very much. That's just what I needed to know.

Have a Happy New Year!

[scanmc]

Thank you very much. That's just what I needed to know.

Have a Happy New Year!

I would also drill a hole in the waste container and vacuum it out. If not eventually it will back up and cause other issues