We had trouble getting drums from okidata, so I had to reset a few to get copiers going. I made a tool for that. You need a couple feet of phone wire, a push switch and a 12 volts bulb.Hook the 2 wires to the copier's 2 bottom contacts, on the toner handle side of drum . Carefully replace the drum and close lid. Start copier while pressing the push button. About 9 seconds into the start sequence,the bulb will turn on. Immidiatly release the push switch, (simulating a fuse blowing) and let the copier start up fully. Shutt it down, remove wires and you done. Takes 5 minutes. If you're a tech, the all thing will make sens to you.
Bookmarks