Replacing a main board in a brother mfc-l6750dw

[JasonSBE]

Hi all, I'm replacing a main board on a brother MFP and according to the service manual I need the following:


(1) One USB cable
(2) Create a temporary folder on the C drive of the computer (Windows® XP or later).
(3) Service setting tool (BrUsbsn.zip)Copy this file into the temporary folder created on the C drive. Extract the copied file.
(4) Download utility (FILEDG32.EXE)Copy this file into the temporary folder created on the C drive.
(5) Maintenance driver (MaintenanceDriver.zip)When the maintenance driver is not installed on the computer, copy this file into thetemporary folder created on the C drive, and extract the copied file. Refer to “APPENDIX3 INSTALLING THE MAINTENANCE PRINTER DRIVER” for the installation procedure.
(6) Firmware
(7) USB flash memory
(8) Touch pen
(9) Memory access tool (MemoryAccessTool.exe)
(10) Shipping tool (ShippingTool.exe)

I am unable to find the files listed in steps 3, 4, 5, 9, and 10

Does anyone happen to have access to these files that they can share with me? I only have access to files for Konica Minolta, Muratec, HP, and some Lexmark

[GIUBOSS]

Hi all, I'm replacing a main board on a brother MFP and according to the service manual I need the following:


(1) One USB cable
(2) Create a temporary folder on the C drive of the computer (Windows® XP or later).
(3) Service setting tool (BrUsbsn.zip)Copy this file into the temporary folder created on the C drive. Extract the copied file.
(4) Download utility (FILEDG32.EXE)Copy this file into the temporary folder created on the C drive.
(5) Maintenance driver (MaintenanceDriver.zip)When the maintenance driver is not installed on the computer, copy this file into thetemporary folder created on the C drive, and extract the copied file. Refer to “APPENDIX3 INSTALLING THE MAINTENANCE PRINTER DRIVER” for the installation procedure.
(6) Firmware
(7) USB flash memory
(8) Touch pen
(9) Memory access tool (MemoryAccessTool.exe)
(10) Shipping tool (ShippingTool.exe)

I am unable to find the files listed in steps 3, 4, 5, 9, and 10

Does anyone happen to have access to these files that they can share with me? I only have access to files for Konica Minolta, Muratec, HP, and some Lexmark

You have done all the steps described in the service manual, it doesn't seem like a difficult procedure although I haven't tried it yet, I have a dozen of these boxes installed.