Originally Posted by
JRR
I just purchased a used PlotWave 300 and I'm finding the print quality is inconsistent across the width of the paper, being somewhat faded in same areas. this is with the Test Prints. I've tried adjusting the density 5% which made no visible difference, and I did the Print Density test and set that offset to +4. Still faded in the same areas. Toner appears to be almost full. No error messages.
I'd like the service manual so I can do more of the maintenance on this machine. I figure this is a relatively straightforward service (I hope) that would be clear in the manual. At least the passwords are all default!
Not unlike my KIP 2900/2710 that I ran for ten years until it finally packed it in due to seals and wipers failing and no more replacement parts were available. It has left the building so no longer can I be annoyed with that machine! Anyone looking for spares for that KIP, as I have toner, developer, and a number of spare parts...
Thanks!
John :-#)#
Bookmarks