Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    thienquansgs
    Guest

    error code E04-1 DP6010 !!!

    hello everybody ! i am a technical for ricoh.i live in vietnam. my copy is panasonic DP 6010 .i see problem arlam E04-1. i was check thermistor ,thermotas , lamp ,and connect all good. when i switch power on then lamp fuser to open about 3 second and off concomitant arlam error code E04-1. i can't enter mode simulation with key "funtion + original size + 3 " in service handbook .what to do? please give me one solution good . thanks everybody .

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jun 2007
    Location
    VANCOUVER , B.C.
    Posts
    60
    Rep Power
    30

    e4=01

    Quote Originally Posted by thienquansgs View Post
    hello everybody ! i am a technical for ricoh.i live in vietnam. my copy is panasonic DP 6010 .i see problem arlam E04-1. i was check thermistor ,thermotas , lamp ,and connect all good. when i switch power on then lamp fuser to open about 3 second and off concomitant arlam error code E04-1. i can't enter mode simulation with key "funtion + original size + 3 " in service handbook .what to do? please give me one solution good . thanks everybody .
    all panasonic products including Panafax needs to be reseted in service mode , even after a paper jam in the fuser. after repair do this

    enter service mode
    go to F9
    06... ram initialize
    04... LBP Fuser Reset
    answere "yes"
    power down when asked

    if E4=01 re occur, the problem is not fixed.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here