Thanks: 0
Likes: 0
Dislikes: 0
Apparently we have a customer who is purchasing a new Kyocera Color copier and wants their employees to use the C354 only for B&W copies and prints (do to the higher costs of using color with the Panasonic I assume.) Is there a way to do this on these machines? I figure there should be but I've never had to make one only copy/print in B&W before. I'm still looking around in the settings but would appreciate any advice.
Thanks in advance!
Last edited by User Name; 08-02-2013 at 09:43 PM.
Just because you're not paranoid doesn't mean they're not out to get you.
O.o
WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.
ftp://ftp.panasonic.com/Pub/panasoni...s_UserAuth.pdf
Off the top of my head, service mode F5-42 turns it on and F5-65 turns on codes for print.
Failing to plan is planning to fail!!!
Yep, I found that this is the best way to restrict color usage. I turned on the departmental counters and set the count for color copies/prints to 0 so it won't allow any to be made.Originally Posted by mojorolla
ftp://ftp.panasonic.com/Pub/panasoni...s_UserAuth.pdf
Off the top of my head, service mode F5-42 turns it on and F5-65 turns on codes for print.
Thanks for the help!
Just because you're not paranoid doesn't mean they're not out to get you.
O.o
WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.
Reply With Quote
Bookmarks