Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out


    Join Date
    Dec 2012
    Location
    bronx ny
    Posts
    127
    Rep Power
    0

    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    I have 25 Panasonic DP-8060 Copiers and 3 of them are giving the j44 error code. Each machine has about 600,000 copies on it. I know the book says exit sensor. Does it mean the exit sensor on the fuser or the machine. Any help would be greatly appreciated.

  2. #2
    Technician 500+ Posts
    Join Date
    Sep 2011
    Posts
    857
    Rep Power
    29

    Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    SB-10-J50_Deformed_LeverPlate-(M-0210i)__DP-8060Series.pdfIn my experience I have had several things cause this. I am assuming that the paper is flat when you go to remove it. In other words, nothing physically stopping the paper.

    1. Customer pulling on exit door prior to opening front door. See attached bulletin. Also I have seen the entire exit door warp. If you have one from another machine try swapping.

    2. The springs on the inverter roller coming off. More likely the one on the front side of the machine.

    3. Exit sensor actuator get a nick, due to wear, and causes enough hesitation to call up jam.

    4. Pressure roller old. Maybe try swapping the fuser if you have one.

    Here is a link to search Copytechnet. Copytechnet Forum Search - Via Google

    That's all I can think of right now.

  3. #3
    Senior Tech 100+ Posts
    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out


    Join Date
    Dec 2012
    Location
    bronx ny
    Posts
    127
    Rep Power
    0

    Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    Thanks.

    Quote Originally Posted by copiman View Post
    SB-10-J50_Deformed_LeverPlate-(M-0210i)__DP-8060Series.pdfIn my experience I have had several things cause this. I am assuming that the paper is flat when you go to remove it. In other words, nothing physically stopping the paper.

    1. Customer pulling on exit door prior to opening front door. See attached bulletin. Also I have seen the entire exit door warp. If you have one from another machine try swapping.

    2. The springs on the inverter roller coming off. More likely the one on the front side of the machine.

    3. Exit sensor actuator get a nick, due to wear, and causes enough hesitation to call up jam.

    4. Pressure roller old. Maybe try swapping the fuser if you have one.

    Here is a link to search Copytechnet. Copytechnet Forum Search - Via Google

    That's all I can think of right now.

  4. #4
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,733
    Rep Power
    58

    Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    Run copies from the platen glass and the document feeder. If it only jams using the document feeder, check the exit baffle solenoid and inspect the sensor inside the inverter as it tends to form nicks on the actuator surface.

    Platen copies exit fuser and go straight to the exit tray. Doc feeder copies exit the fuser, go down into inverter, and then to the exit tray.


    Failing to plan is planning to fail!!!

  5. #5
    Senior Tech 100+ Posts
    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out


    Join Date
    Dec 2012
    Location
    bronx ny
    Posts
    127
    Rep Power
    0

    Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    Ok thanks.

    Quote Originally Posted by mojorolla View Post
    Run copies from the platen glass and the document feeder. If it only jams using the document feeder, check the exit baffle solenoid and inspect the sensor inside the inverter as it tends to form nicks on the actuator surface.

    Platen copies exit fuser and go straight to the exit tray. Doc feeder copies exit the fuser, go down into inverter, and then to the exit tray.



  6. #6
    Service Manager 10,000+ Posts
    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,995
    Rep Power
    145

    Lightbulb Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  7. #7
    Senior Tech 100+ Posts
    Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out


    Join Date
    Dec 2012
    Location
    bronx ny
    Posts
    127
    Rep Power
    0

    Re: Panasonic DP-8060 Error Code J44 and Sometimes J50 exits fuser but error's out

    Thank you all for the response. It was actually a small spring on the exit sensor. When actuated it would go back up to slow. Removed spring tighten it up and wd40 and all is working and has not jam since.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here