Results 1 to 6 of 6
  1. #1
    printgiant
    Guest

    dpc262 touch panel not sensing

    Hi. I am unable to calibrate touch panel on this dpc-262. Touching on the + sign does nothing and no beeps. I have removed the whole pivot assembly, removed the glass panel and cleaned it and edges and reseated cables. Nothing seems to work. Then took the panel's ribbon cable out it had 4 leads. When checked with a multimeter, inner two leads corresponded with different ohm levels when I move the finger on the panel. The outer leads had no impedance levels. Anyone experience this problem? Firmware update or new panel? Any ideas?

  2. #2
    Service Manager 2,500+ Posts
    dpc262 touch panel not sensing

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,190
    Rep Power
    94

    Re: dpc262 touch panel not sensing

    Well known problem. New panel is the only solution. #KORZZZZ0003

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "

  3. #3
    printgiant
    Guest

    Re: dpc262 touch panel not sensing

    Right on the money. My test indicated as in the post, x axis failure in the touch panel.

  4. #4
    Senior Tech 250+ Posts
    Join Date
    May 2009
    Location
    Phoenix,AZ
    Posts
    333
    Rep Power
    0

    Re: dpc262 touch panel not sensing

    Is it the same deal with the DPC323?It is lit up fine but was unresponsive. Changed the outer touch panel. Worked fine. Next day, same thing. Unresponsive. No sounds or beeps. What part is bad?

  5. #5
    Senior Tech 250+ Posts
    dpc262 touch panel not sensing


    Join Date
    Oct 2016
    Location
    Glenwood Springs, Colorado
    Posts
    359
    Rep Power
    35

    Re: dpc262 touch panel not sensing

    I have been asked to repair a Panasonic DP-C625 machine with a bad touch screen and a replace fuser belt unit. Where would one find these parts, and part numbers, since I do not have the manuals.

  6. #6
    Service Manager 10,000+ Posts
    dpc262 touch panel not sensing

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: dpc262 touch panel not sensing

    Quote Originally Posted by eddy out View Post
    I have been asked to repair a Panasonic DP-C625 machine with a bad touch screen and a replace fuser belt unit. Where would one find these parts, and part numbers, since I do not have the manuals.
    good luck.. you need a dealer to get the parts

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here