DP8032

[stormin]

Error code E04-01 how do I reset it or does fuser need to be replaced

[mojorolla]

Service Mode, F9 and run LBP Fuser Reset.

[stormin]

Hi thanks for the advice but there is no lbp reset that i can find under F9 is there any oyother thing that i can do is there a services manual that i can obtain on the internet for this problem

[laitang]

Hi thanks for the advice but there is no lbp reset that i can find under F9 is there any oyother thing that i can do is there a services manual that i can obtain on the internet for this problem

F9 Mode: Unit Maintenance
Set the machine to Service Mode and press “9” key on the Keypad.
↓
Press the “START” key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the “OK” button.
↓
When the “C (CLEAR)” key is touched, the selected code input will not be accepted.
↓
Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the service mode.

F9: Unit Maintenance -> 06: RAM Initialize -> 04: LBP Fuser Reset

[stormin]

F9 Mode: Unit Maintenance
Set the machine to Service Mode and press “9” key on the Keypad.
↓
Press the “START” key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the “OK” button.
↓
When the “C (CLEAR)” key is touched, the selected code input will not be accepted.
↓
Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the service mode.

F9: Unit Maintenance -> 06: RAM Initialize -> 04: LBP Fuser Reset

How do i Get into the service mode again

[buzz]

Press and hold "Function", "Original Size", and "3" buttons simultaneously.