[Error Code] SHARP MX3140N F2-39

[Matoku]

Hi Guys

MX3140/MX3640N error F2-39 >>

1. Process thermistor trouble.2. Process thermistor harness connection trouble.
3. PCU PWB trouble.

Anyone can tell me where is the Process thermistor located is?

Thank you in advance

[onetek]

Re: SHARP MX3140N F2-39

Would it be the same as HUD_M/TH_M sensor?

[kdr363]

Re: SHARP MX3140N F2-39

Capture.JPG Manual feed tray area

[bilyahn]

Re: SHARP MX3140N F2-39

Make sure the small vent holes are not blocked. Happens a lot if someone has an LCT attached. Makes for a nice horizontal surface to store things and block air flow.

Good luck

Bil

[Matoku]

Re: SHARP MX3140N F2-39

[ATTACH=CONFIG]58525[/ATTACH] Manual feed tray area

Thanks a lot kdr363 for your reply. it help a lot.

[Matoku]

Re: SHARP MX3140N F2-39

Make sure the small vent holes are not blocked. Happens a lot if someone has an LCT attached. Makes for a nice horizontal surface to store things and block air flow.

Good luck

Bil

bilyahn Thanks. yes understood. You save my time on this issue.