REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Ok added a stronger version. PETG would be my choice but don't have any.
3 Months with no income...
PETG likes lower layer height and around 250 deg C for nozzle temp.
Whatever
Interesting!!! I've printed at 0.16 layer height & 235°C seemed to flow quite well!!! Only odd thing is when stressed, it would crack across print layers!!! ...235°C is my target temperature for printing PLA!!!....I get Excellent results!!!
Sent from my SM-N950U1 using Tapatalk
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Whatever
I've been printing on glass with hairspray...65°C so far works for PLA. Hotend @235°C with the PLA seems to flow really well!!! No popping or sizzling...just a really smooth flow!!! Probably best since it is not a direct drive and uses a Bowden tube...smoother flow with slightly higher temperature allows for better pressure release on retraction!!!...for bridging I do 100% fan & slight underextrusion to reduce sagging.
Sent from my SM-N950U1 using Tapatalk
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Another vacuum nozzle. Keep on loosing them...
Had a fun lime modeling with lofts. Look 5min in Fusion360!
Form a circle to an ellipse to a rectangle. Plenty strong.
Black PLA would be best.
3M toner vacuum nozzle by Willitbreak - Thingiverse
20200703_073559.jpg
Whatever
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html
Bookmarks